Factory-Reconditioned Bostitch U/RN46-1 3/4-Inch to 1-3/4-Inch Coil Roofing Nailer

Factory-Reconditioned Bostitch U/RN46-1 3/4-Inch to 1-3/4-Inch Coil Roofing Nailer Review

See more picture @ amazon.com

Factory-Reconditioned Bostitch U/RN46-1 3/4-Inch to 1-3/4-Inch Coil Roofing Nailer Feature

• Factory-Reconditioned Bostitch 3/4-inch to 1-3/4-inch coil roofing nailer with lightweight magnesium housing
• Use this dynamic nailer for composition roofing, exterior drywall, vapor barrier installation, insulation board, fiber cement siding, and vinyl siding (with VSA4 adaptor )
• Features zero nail lockout feature to eliminate dry firing and indicates when to reload the magazine
• Includes patented single-action side load canister for fast, 1-step nail loading
• 10-by-6-by-11-inch at 4.9-pounds; backed by full 1-year warranty

This is a factory reconditioned product. Reconditioned generally means that the product has been returned to the manufacturer, who brings the product back to like new condition. Some products may contain cosmetic blemishes. Includes 1-3/4-in 15 degree Coil Roofing Nailer - U/RN46

Factory-Reconditioned Bostitch CPACK2A-R 2-Tool Finish & Brad Compressor Combo Kit

Factory-Reconditioned Bostitch CPACK2A-R 2-Tool Finish & Brad Compressor Combo Kit Review

See more picture @ amazon.com

Factory-Reconditioned Bostitch CPACK2A-R 2-Tool Finish & Brad Compressor Combo Kit Feature

• CAP2000P-OF oil free air compressor: 2.8 CFM at 90 PSI with 150 max, large 6-gallon reserve tank, impact-resistant shroud to protect-Gauges, weighs only 38-Pound
• SB-1850BN Brad nailer: adjustable depth guide, tool-free adjustable exhaust and no mar tip. Drives 18-Gauge brads 5/8-Inch to 2-Inch in length
• SB-1664FN Finish nailer featuring quick release nose door, adjustable depth guide, tool-free adjustable exhaust and no mar tip. Drives 16-Gauge straight finish nails 1-1/4-Inch to 2-1/2-Inch in length
• Included Accessories: 1/4-Inch x 25 foot PVC hose with fittings, 1000 2-Inch 16ga finish nails, 1000 1-1/4-Inch 18ga brad nails, tool lubricant, contractor's tool bag

This is a factory reconditioned product. Reconditioned generally means that the product has been returned to the manufacturer, who brings the product back to like new condition. Some products may contain cosmetic blemishes. Includes 2 HP (Peak) 6 Gallon Oil-Free Compressor - U/CAP2000P-OF, 2-in 18-Gauge Brad Nailer - U/SB-1850BN, 2-1/2-in 16-Gauge Finish Nailer - U/SB-1664FN, 1/4-in x 25 ft PVC Hose with Fittings, Tool Lubricant, Contractor's Tool Bag

Bostitch F33PT 33-Degree Paper Tape Framing Nailer / Metal Connector Nailer

Bostitch F33PT 33-Degree Paper Tape Framing Nailer / Metal Connector Nailer Review

See more picture @ amazon.com

Bostitch F33PT 33-Degree Paper Tape Framing Nailer / Metal Connector Nailer Feature

• Drives 2- to 3-1/2-inch paper tape collated framing nails and 1-1/2- to 3-1/2-inch paper tape metal connector nails
• Metal connector capability includes interchangeable tip for use on joist hangers, hurricane straps, etc
• 1050-inches-per-pound of driving power for tough engineered lumber applications
• Includes 2 quick change nosepieces to convert tool to either framing or metal connector applications
• Lightweight magnesium design for added durability

Framing, siding, decking, installing metal connectors, attaching wood to masonry, driving big nails into hard engineered lumber--you name it--this versatile and lightweight framing nailer from Bostitch does it all. Two nailers in one, this framing gun includes two quick-change nosepieces to convert the tool for either framing or metal connector applications. A factory installed sequential trigger and Bostitch’s exclusive Smart Trigger ensure optimal control and faster production.

Operating in either bump- or sequential-fire modes, the tool’s lightweight magnesium housing means easy handling and unsurpassed durability. Weighing just 7.9 pounds, the tool handles great in tight quarters like attics and during otherwise shoulder-burning overhead tasks. The innovative design is also a godsend when nailing top plates to floor joints or when crawling under that low deck to reinforce the new hot-tub. A patented push-button, depth-of-drive control of course means there’s no adjusting compressor pressure, but also that you don’t have to fumble for tools or awkward switches when you’re standing on a steep roof. Just set the compressor at 80 psi and adjust the depth as needed.

The unit drives 1-1/2-inch STRAPSHOT fasteners as well as all 1-1/2- and 3-1/2-inch metal connector nails measuring .131 to .162 inches in diameter. An interchangeable tip helps place nails accurately for metal connector applications. One of the most powerful framers in its class, this nailer offers 1,050 in./lbs. of driving power.

For less downtime and more productivity, a notched, 16-inch layout indicator on the magazine helps achieve correct distance between studs in a matter of seconds. And, bolt-on, steel wear guards with integrated rubber skid pads protect the tool from bumps and drops for unsurpassed durability and years of use. --Brian D. Olson

What’s in the Box
Nailer, interchangeable tip

Round Head Framing Nails - nail stick 120 120 plain3-1/4 2000 per box

Round Head Framing Nails - nail stick 120 120 plain3-1/4 2000 per box Review

See more picture @ amazon.com

688-S12D-FH This item features: -Wire collated. -Applications: Framing. -Material: Steel. -Point Shape: Diamond. -Type: Framing Nail. Testing and approvals: -ACQ Approved.

Bostitch CPACK3 Finish Nailer, Brad Nailer, Finish Stapler, and Compressor Combo Kit

Bostitch CPACK3 Finish Nailer, Brad Nailer, Finish Stapler, and Compressor Combo Kit Review

See more picture @ amazon.com

Bostitch CPACK3 Finish Nailer, Brad Nailer, Finish Stapler, and Compressor Combo Kit Feature

• Combination pneumatic tool kit with finish nailer, finish stapler, brad nailer, and air compressor
• Power fasteners are lightweight and rugged; air compressor has a high-efficiency 2 hp (peak) motor
• Nailers and stapler feature durable aluminum housing; air compressor has 6-gallon tank and oil-free pump
• Includes all fittings and hoses, 3,000 staples and nails, tool lubricant, and tool bag
• Power fasteners are covered by a 7-year limited warranty; air compressor comes with a 1-year limited warranty; when shipped, this combo kit weighs 62.2 pounds

The CPACK3 combines three great Bostitch power fasteners with a compressor. This kit includes a 16-gauge 2-1/2-inch finish nailer, an 18-gauge 1-inch finish stapler, an 18-gauge 1-1/4-inch brad nailer, and a 2 horsepower air compressor that powers them all. And to get you started immediately, the CPACK3 also comes with a stash of nails, brads, staples, fittings, hoses, lubricant, and a contractor's canvas tool bag.

Straight Finish Nailer
The 16-gauge 2-1/2-inch straight finish nailer (SB-1664FN) drives straight finish nails from 1 to 2-1/2 inches. Its lightweight aluminum design makes it easy to hold and maneuver for precision fastener placement, and the no-mar tip protects your work surface. With a quick-release nose for fast jam clearing and an adjustable depth guide, this nailer is easy to use and quick to set. It also features a tool-free adjustable exhaust.

Applications
Use this nailer to affix interior or exterior finish and trim, to fasten furniture, handle cabinet work, and work on staircases.

Key Technical Specs

• Driving power: 300 in./lbs.
• Magazine capacity: 100 nails
• Operating pressure: 70-100 psi
• Thread fitting type: 1/4-inch NPT

Brad Nailer
The 18-gauge 1-1/4-inch brad nailer (SB-100SX) drives brad nails from 5/8 to 1-1/4 inches. Its lightweight aluminum design is easy to hold and comfortable to use, even over the long haul -- and its no-mar tip helps protect your work pieces. This nailer also has an adjustable depth guide to set nails to your desired depths quickly and with minimal fuss, and it offers tool-free adjustable exhaust.

Applications
Use this nailer to affix interior or exterior finish and trim, to fasten furniture, handle cabinet work, and work on staircases.

Key Technical Specs

• Drives fastener sizes: 5/8-inch to 1-1/4-inch

Narrow Crown Stapler
The 18-gauge narrow crown stapler (SB-125BN) drives 7/32-inch crown SX staples from 1/2 to 1 inch. It has a lightweight aluminum design for added durability, a tool-free adjustable exhaust, and a no-mar tip to protect your work piece during use.

Applications
This crown stapler is ideal for all power stapling needs, including finishing trim, fastening papers, and almost anything else into wood or masonry.

Key Technical Specs

• Drives fastener sizes: 1/2 to 1-inch
• Accepts 18-gauge, 7/32 inch crown SX staples

Air Compressor
The air compressor (CAP60P-OF) has a high efficiency 2 horsepower (peak) motor that produces 1.5 horsepower running. Its 6-gallon tank capacity gives you plenty of power and run time, and its no-maintenance, oil-free pump is easy to maintain and operate.

Key Technical Specs

• 3.4 cfm at 40 psi; 2.1 cfm at 90 psi
• 135 psi maximum output
• 6-gallon tank capacity

Warranty
The finish nailer, finish stapler, and brad nailer are all covered by a 7-year limited manufacturer's warranty; the air compressor is covered by a one-year limited warranty.

What's in the box:
Bostitch 16-gauge finish nailer, 18-gauge finish stapler, 18-gauge brad nailer, 2 horsepower oil-free air compressor, 1/4-inch by 40-foot heavy-duty airline with MPT fittings, 1,000 2-inch 16-gauge finish nails, 1,000 1-1/4-inch 18-gauge brads, 1,000 1-inch staples, tool lubricant, contractor's canvas tool bag.

The CPACK3 combines three great Bostitch power fasteners with a compressor. This kit includes a 16-gauge 2-1/2-inch finish nailer, an 18-gauge 1-inch finish stapler, an 18-gauge 1-1/4-inch brad nailer, and a 2 horsepower air compressor that powers them all. And to get you started immediately, the CPACK3 also comes with a stash of nails, brads, staples, fittings, hoses, lubricant, and a contractor's canvas tool bag.

DEWALT D55141FNBN 16-Gauge Finish Nailer/18-Gauge Brad Nailer/Compressor Combo Kit

DEWALT D55141FNBN 16-Gauge Finish Nailer/18-Gauge Brad Nailer/Compressor Combo Kit Review

See more picture @ amazon.com

DEWALT D55141FNBN 16-Gauge Finish Nailer/18-Gauge Brad Nailer/Compressor Combo Kit Feature

• 2.0 SCFM delivered at90 PSI pump, 2.0 gallon tank and 150 max PSI enables more nails to be fired and provides quicker recovery
• Lightweight (30 lbs), thin (10.5-inch) and compact design is easy to carry and store
• 79 dBA operational noise level for a quieter work environment
• Roll cage and control panel provide protection to key compressor components
• Durable oil free pump provides extended maintenance-free operation; Low 8 amp draw motor provides easy start-up and reduces breaker tripping

With a heavy-duty 16-gauge finish nailer, an 18-gauge brad nailer, an oil-free compressor, and all the fittings you need to get set-up, this kit from DeWalt makes it easy tackle a wide range of finish carpentry and woodworking tasks, from crafting custom furniture to securing molding in place. The 18-gauge nailer can handle up to 100 straight collated nails that are 1/2-inch to 1-1/4 inches long at a time, while the 16-gauge nailer can handle up to 160 straight collated nails that are 1-1/4 to 2-1/2 inches long at a time. Each of these nailers also offers tool-free jam clearing, so a bent or damaged fastener never brings work to a standstill for long, convenient 360-degree exhaust, a unique vertical slide that allows you to select depth settings quickly and without any special tools, an over-molded no-mar pad that grips material for accurate toe nailing and protects your work surface, and a trigger lock for improved safety. Each well-balanced nailer also employs a reversible belt hook that provides convenience for both right- and left-handed users.

Featuring a two-gallon tank and the ability to deliver 2.0 SCFM at 90 PSI and a maximum of 150 PSI, the compressor included in this kit is powerful enough to run both of these nailers at the same time, with dual quick couplers to make set up easy. And at just 79dBA, it is surprisingly quiet. You can count on its durability with details like an oil-free, long-life pump, which ensures smooth, maintenance-free operation that never results in oil spilled on sensitive work surfaces, a high-flow regulator, an easy-to-use ball valve drain, and a thoughtful roll-cage design that prevents damage to critical compressor parts. At just 30 pounds and 10.5 inches wide with a convenient cord-wrap feature, this compact unit is easy to move around the jobsite and to store.

Morpower 2 Hp 4 Gallon Pancake Air Compressor

Morpower 2 Hp 4 Gallon Pancake Air Compressor Review

See more picture @ amazon.com

Morpower 2 Hp 4 Gallon Pancake Air Compressor Feature

• Pancake Style 4 Gallon Tank
• Includes Resettable Circuit Breaker
• 5.6 CFM @ 40 PSI, 4.4 CFM @ 90 PSI
• 7.6 CFM Displacement
• Dual Gauges

Air Compressor New Morpower Pancake Tank design 4 gallon 2 Peak Horsepower Max CFM 7.6 5.6 CFM @ 40 PSI 4.4 CFM @ 90 PSI 120 PSI Max Includes pressure regulator dual gauges oil lubricated Large internal motor fan for cooling Powerful direct drive compressor pump Warrany 12 months

Makita MAC700 Big Bore 2.0 HP Air Compressor

Makita MAC700 Big Bore 2.0 HP Air Compressor Review

See more picture @ amazon.com

Makita MAC700 Big Bore 2.0 HP Air Compressor Feature

• Cast iron pump with big bore cylinder and piston, combined with greater bore and stroke, delivers maximum performance
• Substantially lower noise levels with a large 1,720 RPM pump, enabling greater displacement at lower RPM
• Low amp draw reduces incidences of tripped breakers and voltage drop that can cause premature motor failure
• Oil lubricated provides cooler running pump, minimizes wear
• One-year manufacturer's warranty

Makita's 2.0 HP Air Compressor is equipped with Makita's Big Bore engineered pump cylinder and piston for higher output, less noise and improved job site performance. The MAC700 delivers industrial power and results with improved durability under tough job site conditions.

View larger

MAC700 Features PERFORMANCE - Low noise, low AMP draw in high output DURABILITY - Runs at a lower RPM (1,720) resulting in greater motor and pump life RELIABILITY - Low AMP draw reduces instances of tripped breakers CONVENIENCE - Oil drain and oil sight glass conveniently located for easy access and maintenance INCLUDES - Oil and 1/4" universal quick coupler

Tool Specifications Motor 2.0 HP Pump Oil-lubricated Tank 2.6 "Hot Dog" gal. Performance 90 PSI: 3.3 cfm 40 PSI: 3.8 cfm Maximum Pressure 0 - 130 PSI AMPS 12.4 Noise level 80 dB Size 18"x10"x22" Net Weight 52 lbs.

2.0 HP with Big Bore Engineered Pump
The MAC700 is powered by a 2.0 HP motor. The Makita Big Bore engineered pump with cast iron cylinder has greater bore and stroke for increased compression, faster recovery and less noise. The cast iron construction is engineered for increased durability even under tough job site conditions. The MAC700 has an oil-lubricated pump and is equipped with a large automotive style filter for increased air intake and greater efficiency. The Big Bore oil-lubricated pump is also more efficient: the MAC700 runs cooler and at half the RPM of most competitive units, resulting in greater motor and pump life and lower noise. The 2.6-gallon tank sustains an operating pressure of 130 PSI, and delivers 40PSI (3.8 CFM) and 90 PSI (3.3 CFM). The low AMP draw reduces instances of tripped breakers and voltage drop that can cause premature motor failure. The roll bar handle provides portability and additional protection, helping it withstand harsh jobsite environments. Additional features include a convenient oil drain and oil sight glass, a tank drain valve that supersedes standard petcock design for easier maintenance, and finned discharge tubing that dissipates heat more efficiently.

Versatile Design for a Range of Applications
The MAC700 is engineered for low noise, high output and less maintenance, and delivers industrial power and results with improved durability under tough job site conditions. The MAC700 is just another example of Makita's commitment to innovative technology and best-in-class engineering.

About Makita Big Bore Air Compressors
Makita Big Bore Air Compressors deliver higher output and less noise for improved job site performance. The Makita Big Bore engineered pump with cast iron cylinder has greater bore and stroke for increased compression, faster recovery and less noise. The cast iron construction is engineered for increased durability even under tough job site conditions. All Makita Big Bore Air Compressors are oil lubricated and equipped with large automotive style filters for increased air intake and greater efficiency. Makita Big Bore Air Compressors deliver industrial power and results with improved durability.

About Makita
Makita is a worldwide manufacturer of industrial quality power tools and offers a wide range of industrial accessories. Makita applies leading-edge innovation to engineer power tools that are more compact and energy efficient, yet deliver industrial strength power and results. Makita U.S.A., Inc. is located in La Mirada, California, and operates an extensive distribution network located throughout the U.S. For more information, please call 800/4-MAKITA (800/462-5482) or visit makitatools.com. Makita is Best in Class Engineering.

Warranty
Every Makita tool is thoroughly inspected and tested before leaving the factory. If you are not satisfied with any Makita tool within 30 days of purchase, return it and Makita will provide a replacement or refund. Each Makita tool is warranted to be free of defects from workmanship and materials for the period of ONE YEAR from the date of original purchase. Should any trouble develop during this one-year period, return the COMPLETE tool, freight prepaid, to one of Makita's Factory or Authorized Service Centers. Please see makitatools.com for complete details.

What's in the Box
Makita MAC700 2.0 HP Air Compressor, oil and 1/4-inch universal quick coupler.

This one’s a bit of a paradox: The do-it-yourselfer might pass by this compressor in favor of an oil-free, no-maintenance model, but it’s actually one of the best on the market for the homeowner, hobbyist and weekend warrior.

There are three factors that made us form this opinion. First, it’s the quietest compressor we’ve ever encountered. It’s a remarkable departure in a genre of tools that normally force you to suspend conversation while it’s cycling. The MAC700 puts out 80 decibels, according to the folks at Makita, and when you compare that to the 90 and up you get from most units, that’s practically a hum. So we like this for household use, especially in a basement shop.

Next on our list of pluses for the DIY-er is the low-amp draw, and with that, fewer trips to the breaker box and less chance of premature motor failure. The other feature that won us over is the easy-on-the-hand lever handle ball valve that saves your knuckles when you drain the tank. It’s also got a really fast cycle, so by the time you take a sip of water, you’re ready to work again.

It’s made like a champ, with a roll-bar handle that protects your investment, a cast-iron cylinder for durability and an oil sight glass that makes maintenance a breeze.--Kris Jensen-Van Heste

Narrow Crown Finish Staples - staple 5035 7/32" cn.3/4" galv. 5000 per box

Narrow Crown Finish Staples - staple 5035 7/32" cn.3/4" galv. 5000 per box Review

See more picture @ amazon.com

Narrow Crown Finish Staples - staple 5035 7/32" cn.3/4" galv. 5000 per box Feature

• Applicable Materials=Steel, Cross Section Shape=Round, Quantity=5000 per pack, Staple Height=3/4 in,
• Adhesive collated

688-SX50353/4G This item features: -Adhesive collated. -Applicable Materials: Steel. -Cross Section Shape: Round. -Staple Width: 7/32 in. -Type: Finish Staple. -Wire Size: 18 gauge, 0.0480 in. -Price is for 1 Box. Unit Sold is in measure of 1 Box

Bostitch MFN200 Manual Flooring Cleat Nailer

Bostitch MFN200 Manual Flooring Cleat Nailer Review

See more picture @ amazon.com

Bostitch MFN200 Manual Flooring Cleat Nailer Feature

• Manual flooring mailer with 200-nail capacity magazine
• Light, easy-to-use nailer drives L-shaped cleats with a single blow; wide foot design
• Durable, lightweight aluminum; rubber bumper protects flooring
• Includes white-faced rubber mallet
• 13-1/2 by 17-1/2 by 3-1/2-inches; 9-1/2-pounds; 7-year warranty

If you're not into pneumatics, this may well be your best choice for a flooring nailer. It's lightweight but incredibly well-made, and it securely drives its L-shaped, serrated cleats into tongue-and-groove, 3/4-inch solid hardwood flooring.

Straightforward enough for the do-it-yourself flooring installer, yet durable enough for the professional, this mallet-actuated flooring nailer comes with a rubber mallet so you’re up and running out of the box. Great for installing hardwood and engineered flooring, this nailer is lightweight but incredibly well-made. It drives 1-1/2- to 2-inch, L-shape, serrated cleats into tongue-and-groove, 3/4-inch solid hardwood as well as engineered flooring. An aluminum housing ensures optimal jobsite durability and easy handling. A long reach handle means less bending at the waist for better comfort and control. Rubber bumpers along the tool body help protect the floor from damage, a big plus when installing pre-finished flooring. Best of all, a 200-cleat magazine means fewer reloads, so you get the job done fast. Bostitch backs this tool with its 7-year warranty. --Brian D. Olson

Applications:
Installing hardwood and engineered flooring

What’s in the Box
Nailer, rubber mallet

Bostitch Factory-Reconditioned U/CPACK300 3-Tool and Compressor Combo Kit

Bostitch Factory-Reconditioned U/CPACK300 3-Tool and Compressor Combo Kit Review

See more picture @ amazon.com

Bostitch Factory-Reconditioned U/CPACK300 3-Tool and Compressor Combo Kit Feature

• Kit includes: 18-gauge brad nailer, 18-gauge finish stapler, and 16-gauge finish nailer
• Includes factory-reconditioned six-gallon oil-free compressor (2.8 CFM at 90 PSI with 150 max)
• Accessories included: 40-foot PVC hose
• Includes canvas carrying case
• One-year limited warranty

The Bostitch 3-Tool and Compressor Combo Kit bundles the 18-Gauge 2-Inch Brad Nailer, the 18-Gauge 1-1/2-Inch Narrow Crown Finish Stapler, and the 16-Gauge 2-1/2-Inch Straight Finish Nailer, along with the powerful 6-Gallon 2.0 HP (Peak) Oil-Free Compressor. This kit gives you the versatility you need for tackling a wide variety of finish and trim projects.

This kit includes a powerful oil-free compressor and 3 finish and trim tools. View larger.

The Bostitch 3-Tool and Compressor Combo Kit offers tools with: No-mar tip protects work surface for smooth, damage free work Tool-free adjustable air exhaust systems for user comfort High magazine capacity for decreased reloads Tool-free adjustable depth guide for setting nails to desired depths quickly and conveniently (Finish Nailer & Brad Nailer)

The finish nailer is ideal for baseboards and window and door casings. View larger.

The brad nailer is handy for staircase and cabinetry applications. View larger.

The finish stapler is great for cabinet work, carpet laying, and upholstering furniture. View larger.

The compressor's impact-resistant shroud with integrated handle protects gauges from jobsite damage. View larger.

Pneumatic Fastening for Fast, Accurate Detail Work
Detail work comes in many shapes and sizes and requires you to use different types of materials. Choosing the right tool for each job is an essential part of making certain your finished products look their best. That's why this kit sets you up with three distinct pneumatic fastening tools.

Each of these well-balanced tools is designed to sit neatly in your hand, letting you maintain control and precision. And each offers a wide range of simple, intuitive features, from no-mar tips that protect your work surface to tool-free adjustable exhaust systems that direct air away from your face to keep you comfortable while you work.

Three Dependable Tools for Handling Tough Jobs
The included 16-Gauge Straight Finish Nailer offers a convenient, adjustable depth guide and a quick-release nose for fast jam clearing. It is designed for handling nails 1 to 2-1/2 inches long, making it a great pick for moldings and door and window casing applications. The nailer provides 300 in./lbs. of driving power, a magazine capacity of 100 nails, and weighs in at four pounds.

Ideal for everything from staircases to cabinetry applications, the included 18-Gauge Brad Nailer makes use of the adjustable depth guide to set nails to desired depths quickly and conveniently. Behind its fast, reliable performance is the ability to deliver 145 in./lbs. of driving power. This nailer handles 18-gauge brads from 5/8 to 2 inches and weighs just 2.7 pounds.

Also included in the kit is the 18-Gauge Narrow Crown Finish Stapler, because whether you're working with cabinetry, floor underlayment, or upholstering furniture, a stapler is the right tool for the job. This stapler utilizes 135 in./lbs. of drive power to secure 7/32-inch narrow crown staples, features a bottom-load magazine for fast loading and easy jam clearing, and weighs 2.6 pounds.

All three of these tools offer a magazine capacity of 100 fasteners, so you don't constantly have to stop and reload, and each one is backed by a manufacturer's 7 year limited warranty.

Durable Six-Gallon Oil-Free Compressor
Built to keep your tools running smoothly and reliably, the 2.0 HP (Peak) Compressor delivers 2.8 CFM at 90 PSI with a maximum operating pressure of 150 PSI for improved tool performance. This compressor's oil-free pump design requires less maintenance than traditional models, and its large, six-gallon reserve tank includes a ball-type drain valve for easy drainage at the end of each day. It also employs an impact-resistant composite shroud to protect important gauges from job-site damage.

Heavy-Duty Motor Operates Smoothly and Quietly
The compressor's 2.0 HP (Peak), 1.5 HP running motor features easy startup and an expert design that draws 12 Amps without tripping your circuit breakers, so work can be done hassle-free. And the compressor's operation acoustics run at a quiet 72 dBA, making it ideal for use in smaller or more populated areas. The compressor is backed by a 1 year warranty.

Note to customers: When operating the compressor be sure the draincock is closed and the quick disconnect is not stuck.  Either issue will prevent the compressor from working properly.

What's in the Box
6-Gallon 2.0 HP (Peak) Oil-Free Compressor; 18-Gauge 2-Inch Brad Nailer; 18-Gauge 1-1/2-Inch Narrow Crown Finish Stapler; 16-Gauge 2-1/2-Inch Straight Finish Nailer; and 1/4-inch x 40-foot PVC air hose.

Available Bostitch Fasteners:

For the Finish Nailer:	Model # SB16-1.25-1M SB16-1.5-1M SB16-1.75-1M SB16-2.00-1M SB16-2.5-1M	Description 16 ga. 1-1/4" Finish Nails - 1000 ct. 16 ga. 1-1/2" Finish Nails - 1000 ct. 16 ga. 1-3/4" Finish Nails - 1000 ct. 16 ga. 2" Finish Nails - 1000 ct. 16 ga. 2-1/2" Finish Nails - 1000 ct.
*2500 ct. sizes also available
For the Brad Nailer:	Model # BT1303B BT1309B BT1309B-1M BT1335B BT1335B-1M BT1340B BT1350B BT1350B-1M	Description 18 ga. 5/8" Brad Nail - 3000 ct. 18 ga. 1" Brad Nail - 3000 ct 18 ga. 1" Brad Nail - 1000 ct. 18 ga. 1-3/8" Brad Nail - 3000 ct. 18 ga. 1-3/8" Brad Nail - 1000 ct. 18 ga. 1-9/16" Brad Nail - 3000 ct. 18 ga. 2" Brad Nail - 3000 ct. 18 ga. 2" Brad Nail - 1000 ct.
*Additional sizes and 1000, 3000, & 5000 ct. also available
For the Finish Stapler:	Model # SX50353/4G SX50351G SX50351-3/16G SX50351-3/8G SX50351-1/2G	Description 18 ga. 3/4"x7/32" crown Finish Staples - 5000 ct. 18 ga. 1"x7/32" crown Finish Staples - 5000 ct. 18 ga. 1-3/16"x7/32" crown Finish Staples - 3000 ct. 18 ga. 1-3/8"x7/32" crown Finish Staples - 3000 ct. 18 ga. 1-1/2"x7/32" crown Finish Staples - 3000 ct.
*Additional sizes and 1000, 3000, & 5000 ct. also available

This is a factory reconditioned product. Reconditioned generally means that the product has been returned to the manufacturer, who brings the product back to like new condition. Some products may contain cosmetic blemishes. Includes 2.0 HP (Peak) Oil-Free Compressor - CAP2000P-OF-R, 2-in 18-Gauge Brad Nailer - SB-1850BN, 1-1/2-in 18-Gauge Finish Stapler - SB-150SX, 2-1/2-in 16-Gauge Straight Finish Nailer - SB-1664FN, 1/4-in x 40-ft Heavy Duty Airline With Fittings, Tool Lubricant, Contractor's Canvas Tool Bag